How To Change The Battery In A Honda Crv Key Fob. Once the locks have cycled, your vehicle is in remote programming mode. Close all the doors to your vehicle, but don’t lock them.
Separate the two halves of your remote using a small flathead screwdriver. Instead of going to the dealership, save yourself some money! Note the position of the positive and negative sides of the battery in the remote.
Once The Locks Have Cycled, Your Vehicle Is In Remote Programming Mode.
Find the small screw holding the honda key together. Put the motherboard back into the key fob with the rubber film up against the buttons. Note the position of the positive and negative sides of the battery in the remote.
Get In The Car On The Driver’s Side.
Use the flathead screwdriver to pry apart the two pieces of the key fob, but do so carefully. Now that the key fob is open, make sure that you press down the contents of the key fob to prevent them from falling apart by keeping your thumb on the battery. Insert the crossbar between the empty spaces of the top two buttons, with the crossbar’s curvature facing outwards.
Put The Motherboard Back Into The Key Fob With The Rubber Film Up Against The Buttons.
Turn the ignition switch to the on position. Turn the key to the “on” position and hold the “lock” button on the key fob for one second. The dealer wanted $15 to replace the battery.
Press And Hold The “Lock” Button For One Second.
Repeat steps 4 to 6 for two more cycles. Insert the battery back into the motherboard with the positive sign facing out. Repeat this process twice more.
Remove The Old Battery, Taking.
Remove the battery carefully, trying not to touch the terminals. Release the button and turn the key to the “off” position. A honda key fob battery can be purchased almost anywhere, although it is recommended to purchase a genuine honda part.